Dingy Cover For Galeon 560 Skydeck

Dingy CoverThis 2017 Galeon 560 Yacht  needed a new dingy cover.

Here at Chicago Marine Canvas we specialize in custom covers therefore, none of our covers are the same. They are all different to ensure that each one fits the boat in need properly. We also use many labor-saving tools that help us do things quickly. This saves you money at the end of the day on the perfect cover.

Dingy CoverThe first step to our process is to head out to your boat to take measurements with our 3D measuring device. After we gather precise measurements we head back to the shop to start our design process on the computer. We do all of our design work using CAD (Computer-Aided-Design) Software. Because we are working on the computer we can see exactly what we are creating in 3D. This allows us to create the perfect fitting cover for your boat. After the cover is designed, we draw it out using our plotter. This draws out all the pieces of the pattern perfectly so our seamstress can sew it up!

Dingy CoverThis dingy cover was created out of Stamoid. Stamoid is a great material to make a boat cover out of. It is water, UV, and stain resistant. We used SolarFix thread in clear to sew this all together. Solarfix is a PTF thread which is also, UV, chemical, and mildew resistant. Which means, that you’d never have to bring your new dingy cover in for restitching after it’s been out in the sun for a few summers! Finally, on the bottom of the cover we did a draw cord. As a result, the cover can tighten around the dingy keeping the cover nice and secure, and your boat dry!

Rinker Fiesta Vee 270

Rinker Vee 270 Custom Cockpit Cover by Chicago Marine CanvasTo protect the interior of your boat, it is important to have a waterproof cover. Here at Chicago Marine Canvas we do custom covers for every boat, because every boat is different and we want your cover to fit tight so there is no room for water leaks when a rain storm comes. This is a Rinker Fiesta Vee 270 and we fabricated a custom cover for it this summer.

We start off our process by going out on site to the boat to take measurements. Here at Chicago Marine Canvas we have a lot of cost-effective, labor-saving tools that help cut your covers cost down while making sure it is the perfect fit! For measuring Rinker Vee 270 Custom Cockpit Cover by Chicago Marine Canvaswe use a portable 3d measuring device. After we gather all the measurements needed we head back to the shop to start the design process. For this cover our designer made sure to make cut outs for all the framing on this boat, leaving it up to our seamstress to make individual boots for each pole, along with velcro straps to assure the cover isn’t going anywhere in these Chicago winds. After we do all of our design work we head over to our plotter which draws out all of the pieces of your cover we just finished up. This is another one of our labor-saving tools. Our plotter can quickly draw out all of our patterned pieces for your new cover, instead of us having to do it all by hand! After everything is drawn out, we hand it all over to our seamstress so she can begin her process. She starts off by cutting everything out and then looking at the pattern to figure out the best way to sew everything together. After that, she organizes all the pieces and gets to work.Rinker Vee 270 Custom Cockpit Cover by Chicago Marine Canvas

For this cover we used Sunbrella fabric in the color doubonette tweed. We love using Sunbrella fabric! It is fade resistant and has a 10 year warranty! To sew everything together we used GORE tenara thread in black. GORE tenara is another favorite product of ours. It is UV, salt water, chemical and extreme weather resistant! It has a lifetime guarantee, which  means, all of your seams will outlast your canvas! We also installed a Boat Vent II in the middle of this cover so that all water that hits it, runs off!

We used DOT snaps in burgundy to blend into this cover, as well as stay puts all along the back.

 

39′ Carver – Full Flybridge Enclosure

39′ Carver was in need of a full enclosurelets-dance-bimini for its flybridge. For this marine cover we used Sunbrella Plus in Black. Sunbrella Plus has one side coated with polyurethane and acrylic, leaving one side of the material rubbery. We used GORE Tenara thread in black and Lenzip Zippers.  For the glass this customer chose Strataglass. lets-dance-3dWe made sure to design this enclosure with maximum visibility.
lets-dance-exterior-fwd-mainThis enclosure has seven Strataglass panels, including three roll up windows. One in the forward center window, and one on the star and port side of the enclosure. We used DOT snaps to secure the windows to the Flybridge creating a nice secure space for the owners of this boat!lets-dance-interior