sunbrella Archives | Page 4 of 7 | Chicago Marine Canvas

November 14, 2017December 4, 2023

Cruisers Rogue 3175

This Cruisers Rogue 3175 was in need of a new bimini. Biminis are great for keeping you out of the sun when you are out on the water, they even keep you dry if you get caught out in a storm.

All of our covers, biminis, enclosures, and upholstery work is custom made. We work this way because each boat has different framing which means each boat is different and we want your new canvas to fit like a glove!

Here at Chicago Marine Canvas we use a bunch of labor-saving, cost-effective tools. The first step of our process involves us going to to your boat and taking measurements with our 3D measuring device. Using this tool speeds up our measuring process so we have more time to work on your custom design!

After we gather all the measurements, we go back to the shop and upload them to the computer. We do all of our design work using CAD (Computer-Aided-Design) software, that way we can make all the proper adjustments a head of time, as well as see visually how the design is going to turn out.

Once we finalize the design, we send over all the pieces of your new cover to our plotter. Our plotter draws out all of the pieces of your cover. This is another one of our labor-saving, cost-effective tools. With our plotter we can quickly draw out new designs in minutes rather then hours. This saves us time and you money in the end. After our plotter is finished, our seamstress cuts everything out, and begins the sewing process.

For this bimini we used Sunbrella fabric in black. We love using Sunbrella fabric! It is fade resistant and has a 10 year warranty! To sew everything up we used GORE Tenara thread in black. GORE Tenara thread has a lifetime warranty! That means you can say good-bye to restitching and repairs! This thread doesn’t get eaten by the sun, water, or exposure to other outside elements. We used Lenzip zippers for this bimini. Lenzip also has a lifetime guarantee on zippers. No more zipper teeth breaking, no more zippers loosing their zip! We finished off this bimini with Sunbrella black binding to make sure theres no fraying of any canvas, that way it lasts!

November 14, 2017December 4, 2023

Sundancer 270

This Sundancer 270 was in need of a new cockpit cover. They contacted us because we specialize in custom covers!

We start off each new job by talking with you about what you need when it comes to your new cover. Then we head out to your boat and start our design process. All of our covers are custom, so that your new canvas fits like a glove, especially hand crafted for you! Once we travel out on your boat, we use our 3D measuring device to take precise measurements quickly and efficiently. Here at Chicago Marine Canvas we use a lot of labor-saving, cost-effective tools. After we gather all of our measurements we head back to the shop and let our designer get to work.

Sundancer 270 Cockpit Cover By Chicago Marine Canvas

We design all of our covers on the computer using CAD (Computer-Aided Design) software. This way we can create a 3D version of your cover, making sure everything looks perfect before we sew it up! After we finish up all the design work, we head over to our plotter and have everything drawn out. Our plotter is another one of our cost-effective, labor-saving tools. It speeds up our patterning process which saves us time and you money in the long run. After everything is all drawn out, our seamstress cuts everything out and then sews everything together.

This cover was fabricated using Sunbrella fabric in Teal Tweed.We love using Sunbrella fabric! It is fade resistant and has a 10 year warranty! We backed the front of the cover wit a fabric called Evolution, that way if there was any rubbing from the windshield, it wouldn’t rip through this families new cover. We used Sunstop T135 in black thread to sew this up, along with black binding around all the edges. Then we also created boots for each of the poles for the framing around the boat. We did custom cuffs, and flaps around each pole to ensure its security and waterproofness. To ensure no mold or mildew, along with proper airflow when the cover is up, we installed a Boat Vent II in the back of the boat. It helps prop the boat cover up which helps prevent pooling so that water rolls off of your cover instead of sitting on it when it gets wet. We secured this cover to the boat using DOT snap fasteners in black.

November 8, 2017December 4, 2023

Sabre Hardtop Aft Enclosure

The owner of a 42′ Sabre Hardtop Express contacted us about needing their aft enclosure replaced. Their makrolon windows had been slightly discolored but more importantly, their canvas had lost its durability and waterproofness.

When we do a job, we first head out to the location of the boat to take custom measurements using our 3d measuring device. This device is cost-effective and labor-saving. We can measure a boat quickly even if there are high Chicago winds. After we gather all of our measurements and think about all of your design needs, we head back to our shop to start designing your new cover. This is yet another thing that sets us apart from your typical canvas shop. We do all of our design work using CAD (computer aided design) software on the computer. This way we can see exactly what the cover will look like before its on your boat, making sure we get all the details right the first time around!

For this aft enclosure, we used Sunbrella fabric in toast. Sunbrella fabric has a 10 year warranty. For the glass we used Makrolon. Makrolon is a semi-rigid polycarbonate. Makrolon makes your new cover look modern and slick, with no sagging windows due to temperature changes throughout the year. To sew everything together we used GORE tenara
thread in clear. GORE tenara thread has a lifetime guarantee, meaning it will outlast your canvas! If you get your new cover sewn up with GORE tenara thread, you can say good bye to repairs and hello to high-quality craftsmanship! For attaching the panels together we used Lenzip zippers in beige. Lenzip zippers have a life-time guarantee!

This cover has all hidden kedar track that was sewn to the top of the panels, which attached to the hard top creating a water tight seal from panel to hardtop. All of the snaps are hidden as well, and are on a separate flap on the bottom inside of each panel.

November 1, 2017December 4, 2023

Donzi 3250 LXC Cockpit Cover

This Donzi 3250 LXC was in need of a new cockpit cover so they gave us a call! We start out all of our jobs by first going out to your boat take measurements so we can begin our process. Here at our shop we use a lot of labor-saving, cost-effective tools. When we go out to take measurements we use our 3d measuring device to digitally map out your boat. Since all boats are slightly different because of framing and other attachments, this makes it quick, and easy for us to gather our measurements as well as map out the small differences that makes your boat slightly unique then another one.

After we gather all of our measurements from your boat, we head back to the shop to start our design process. When we get to this point we upload our measurements we just gathered into our CAD software program and start making the perfect custom cover for you! After our designer finishes your custom cover, we send it over to our plotter which draws it out for our seamstress, saving us time and you money! Then we cut out your new cover and our seamstress starts sewing it up.
For this cockpit cover we used Sunbrella fabric in black. Sunbrella is fade resistant and has a 10 year warranty. We used GORE Tenara thread in black to sew this cover up. GORE Tenara has a lifetime guarantee, which means that this thread will outlast your canvas! No more sun-eaten threads on your new cover, which means no more restitching or repairs!!! Then we used a Boat Vent II to help hold the cover up to prevent pooling, as well as bring some air flow into the boat when the cover is up, to prevent mold and mildew if the interior ever gets wet!

October 10, 2017December 4, 2023

Mediterranean Mainship

This 1989 open Mediterranean Mainship was in need of some protection from the rain, so we created it a cockpit cover using some of our favorite products.

We start out all of our projects by going on site to the boat. We bring out our special 3d device to take measurements. Our 3d measuring device is cost-effective and labor-saving. It saves us time taking measurements which in the end saves you money on your new cover! After we gather our measurements we need we head back to the shop. We upload all of our measurements we gathered and start working on the design process. We do all of our design work on the computer, creating a 3d design so we can see what the end product will look like. This way we can make sure to make any adjustments, or special needs that your cover may need on there instead of making multiple trips out to your boat. In this case we knew where all the poles for the framing of this boat were located, so during the design process we made sure to include them. After we finish the design process, we bring the design to our plotter, which is also a labor-saving, cost-effective tool we use here at Chicago Marine Canvas. It helps us save time by drawing out the patterned pieces of your new cover quickly, instead of us having to do it by hand. Then we hand everything over to our seamstress, who cuts out all the pieces and starts sewing them together.

For this Mediterranean Mainship we used Sunbrella canvas in black along with black Sunbrella binding. Sunbrella canvas is one of our favorite products to use to create a new boat canvas for our clientele. It is fade resistant and has a 10 year warranty. To sew everything together we used GORE tenara thread which is UV, chemical, saltwater and extreme weather resistant. It has a lifetime guarantee and is great for outdoor applications. This thread will outlast your canvas. Our designer made sure to include all the locations of where the framing poles were, so we could make boots that wrapped around each pole, helping prevent water leakage from getting to the interior of this boat. We created custom boots and flaps using Sunbrella and velcro so that the cover would be nice and secure onto the boat. We attached the cover using DOT snaps in black, attaching from the top of the windshield to the back of the boat. We also used Boat Vent II to help with water runoff as well as ventilation in the boat. while your cover is up.

September 22, 2017December 4, 2023

Sea Ray Full Enclosure

Sea Ray 460 Full Enclosure

This winter we did a full enclosure for this Sea Ray 460 at Chicago Yacht Works.

We love doing jobs like this during the winter because we can really take our time to make sure that everything is perfect for when the boat hits the water in the summer!

When we do custom enclosures we always save you some time and money by using our 3d measuring device to take measurements of your boat. Then we custom design your new cover to tailor to your boats specifications. Here at Chicago Marine Canvas we want your new cover to fit like a glove! We also want to help you keep your boat dry along with it looking nice and modern!

For this Sea Ray we used Sunbrella fabric in marine blue along with GORE tenara thread in black. For all of our enclosure we suggest that you use GORE tenara thread because it has a lifetime guarantee. That means that your thread will outlast your canvas. This also means that your seams won’t need repairs the whole time you have this canvas. GORE tenara won’t get eaten by the sun or other elements, which is why we encourage our customers allow us to fabricate their new cover with this high quality thread! Say good-bye to repairs and hello to high quality!

For the forward windows of this Sea Ray we used makrolon which is a semi-rigid polycarbonate. This material is great because it looks as if the windows are extensions of the actual boat windshield. Since it is a semi-rigid material there is no window stretching or contracting due to temperature changes in between seasons.

For the aft windows we used strataglass. As of September 1,strataglass is the only vinyl on the market that has a two year warranty. For all these panels to stay together we used Lenzip zippers in black which have a lifetime guarantee.

September 19, 2017December 4, 2023

Seafox 256 Cockpit Cover

We fabricated a custom cockpit cover for this Seafox 256 fishing boat.

For all of our work we create, we have to go out on site to take custom measurements. We do this with our 3d measuring device, which is quick and efficient. It saves us time and you money on your new custom cover. Then we head back to the shop and we start designing your cover on the computer. We make sure that we have covered all of your concerns and needs due to every boat being different. After we finish up the designing process we have our plotter draw out all the pieces of fabric, then we hand everything over to our seamstress and the cover is assembled.

Since the Seafox 256 is more of a fishing boat, we made a cockpit cover that attached onto the top of the windshield with DOT fasteners and then extended over and down the back of the captains chair. Now all of this Seafox’s upholstery is protected from rain and other elements all season long while on the water.

This cockpit cover is fabricated out of Sunbrella fabric in cadet grey with GORE tenara thread in grey. GORE tenara thread has a lifetime guarantee which means it won’t get eaten by the sun. Sunbrella fabric is fade resistant and has a 10 year warranty.

Since this cover sits against the captains chair we added a soft fabric called evolution which is easy to clean. It adds protection to the boat cover so it wont rub up against the seat causing any wear and tear to this boast upholstery work. Evolution is also mold and mildew resistant and dries quickly if ever wet!

We used grey DOT snaps to secure this cover onto this boat. No wind will be ripping off this cover this summer!

September 19, 2017December 4, 2023

Wellcraft St. Tropez

After we fabricated a new cover for this customers neighbor, he called us wanting a new cover as well. This 32′ 1988 Wellcraft St. Tropez needed a new cockpit cover to keep its interior dry!

We do each cover we create custom, which requires us to go out to each boat. We do this because each boat is set up slightly different. Whether it be a minor adjustment to framing or the overall set up of the boat. That way your cover fits your boat like a glove! Our first step is to take 3d measurements of the boat quickly and efficiently. Our 3d measuring device is cost-effective and labor saving, which means it saves us time and you money! After we take measurements we head back to the shop to do design work on the computer making sure that our designer meets all your boating needs when it comes to your new cover. After we finish the design work, we head over to our plotter which is another cost-effective, labor saving tool we have here at Chicago Marine Canvas. After it’s all drawn out, we give everything over to our seamstress and she sews it up.

For this cockpit cover we used Sunbrella fabric in the color dubonnet tweed along with Sunguard polyester thread in black.

We did cut outs for this boats poles that had custom cuffs and velcro flaps to ensure security of the cover onto the boat, as well as preventing water from getting into where the poles are on this boat.

32' Wellcraft St. Tropez Cockpit Cover

We used a boat vent II to ensure airflow so that no mildew or must get stuck inside the boat if the inside ever gets wet!

We also put 2″ black webbing all around the bottom edge of this boat to to reenforce where we placed each one of the snaps. For snaps we used DOT fasteners in burgundy to blend into the cover.

September 18, 2017December 4, 2023

Sea Ray Full Enclosure

This Sea Ray was in need of a new full enclosure, as well as new framing. We went out with our 3d measuring device and started to get to work. We first took some measurements of the boat so we could make sure the new custom framing would fit the boat properly. After that we headed back to the shop and started working on that first. After we installed the new framing, we brought our 3d measuring device back out to the boat and took measurements for the new custom full enclosure. Then we headed back to the shop to start the design process on the computer. Our designer makes sure to meet all your needs and all the special custom things that your boat may have, so that your new cover can fit perfectly! After we finish the design process we bring the design over to the plotter which helps us speed things up by drawing out all the pieces of the full enclosure. Then our seamstress cuts everything out and starts sewing all the pieces together.

For this enclosure we used toast tweed Sunbrella fabric, GORE tenara thread, and Lenzip Zippers. Both GORE tenara and lenzip have a lifetime guarantee, which means the thread and zippers are going to outlast your canvas!

For the forward windows we used Makrolon which is a semi-rigid polycarbonate. Makrolon is great because it can’t expand or contract during the summers or the winters, and because it is a harder glass it looks as if you have a extension off of your windshield.

For the aft windows we used Strataglass. Strataglass now offers a 24 month warranty on their products after they have been fabricated and installed on your boat. It is now the only vinyl on the market that has a warranty.

We used DOT fasteners in winter wheat so that they would blend in to the fabric!

September 18, 2017December 4, 2023

Twin Helm & Bridge Table Cover

Twin Helm And Bridge Table Cover For this sailboat we created twin helm covers and a custom slip cover for their bridge table.

We start of all of our jobs by going onsite to take measurements. We use our special 3d measuring device, which is easy and efficient. This process alone saves us time and you money at the end of the day. After we get our measurements we head back to the shop to begin our design process on the computer. All of our custom covers are designed using CAD (Computer-Aided Design) software. This makes things super easy for us, allowing us to see the design before we sew it all up, that way we can ensure that all of your needs are met and there are no design flaws on our end. After we finish up designing everything, we go to our plotter and draw out all the pattern pieces for our seamstress to sew up. Out plotter is another one of our labor-saving, cost-effective tools. It draws out our design perfectly on the fabric so that everything fits just as it should. After everything is drawn out, our seamstress cuts out all the pieces and gets to work!

Twin Helm And Bridge Table Cover

For these covers we used Charcoal Sunbrella fabric. Sunbrella comes with a 10 year warranty and is fade resistant!!! To sew everything together we used GORE tenara thread. GORE tenara thread is a great thread to use on your new canvas, because it has a lifetime guarantee. It is chemical resistant, UV resistant, salt water resistant and extreme weather resistant. and Lenzip zippers. For our zippers we use Lenzip. These also come with a lifetime guarantee!

We did a hidden zipper on these to help make them look nice, clean and modern. It also prevents water leakage making sure that everything stays nice and dry.